Hallo Liste,
Hab jetzt ziemlich rumprobiert und lt. folgender readme müsste es doch möglich sein einen alias in seine einzelnen Adressen umzuschreiben: Hier drin steht:
*
Replace an address by multiple addresses. For example, replace the address of an alias by the addresses listed under that alias.
readme: https://www.postfix.org/ADDRESS_REWRITING_README.html
meine sender_canonical_maps bzw. meine recipient_canonical_maps sehen so aus: abt-versand@meinedomain.at email1@meinedomain.at,email2@meinedomain.at,email3@meinedomain.at
Versende ich nun eine E-Mail an meine externe private E-Mail-Adresse und CC an abt-versand@meinedomain.at, sehe ich trotzdem nur den alias "abt-versand@meinedomain.at" nicht aber die einzelnen 3 E-Mail-Adressen, die diesen alias haben.
Keiner eine Idee?
VG, Andi
Am 30.09.2022 um 11:29 schrieb Andreas Wass - Glas Gasperlmair:
Hallo Liste,
Gleich vorab: Bitte keine Kommentare bezüglich "verwende doch mailman" oder "schreib den alias doch ins BCC Feld"
Ich habe da einige aliases in meiner DB, welche ich als Verteilerliste verwenden möchte. virtual_alias_maps = proxy:mysql:/etc/postfix/mysql-virtual-alias-maps.cf
+-----+-----------+------------------------+------------------------+ | id | domain_id | source | destination | +-----+-----------+------------------------+------------------------+ | 1 | 2 | abt-versand@meinedomain.at | email1@meinedomain.at | | 2 | 2 | abt-versand@meinedomain.at | email2@meinedomain.at | | 3 | 2 | abt-versand@meinedomain.at | email3@meinedomain.at | +-----+-----------+------------------------+------------------------+
Das ganze funktioniert prima, allerdings hätte ich gerne, dass Empfänger nicht sehen, dass das E-Mail an abt-versand@meinedomain.at gesendet wurde, sondern dass das E-Mail an email1@meinedomain.at, email2@meinedomain.at und email3@meinedomain.at gesendet wurde.
Ich möchte einfach verhindern, wenn ein E-Mail z.B. extern an office@irgendeinkunde.at versendet und der alias ("Verteiler" ) abt-versand@meinedomain.at im Feld CC steht, dass dieser alias (Verteiler) NICHT als solcher beim Kunden z.B. ersichtlich ist. Trotzdem möchte ich, dass der Kunde sieht, dass das E-Mail als CC auch an email1@meinedomain.at, email2@meinedomain.at und email3@meinedomain.at gesendet wurde
Kann man das mit address rewriting umsetzen und wenn ja wie?
Ich hoffe, ich habe mich klar genug ausgedrückt
Anbei noch meine master.cf, falls hier was zu ändern ist:
#
# service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (no) (never) (100)
#
#smtp inet n - y - - smtpd smtp inet n - y - 1 postscreen smtpd pass - - y - - smtpd -o smtpd_sasl_auth_enable=no dnsblog unix - - y - 0 dnsblog tlsproxy unix - - y - 0 tlsproxy submission inet n - y - - smtpd -o syslog_name=postfix/submission -o smtpd_tls_security_level=encrypt -o smtpd_sasl_auth_enable=yes # -o smtpd_tls_auth_only=yes -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions -o smtpd_recipient_restrictions= -o smtpd_relay_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - y - - smtpd # -o syslog_name=postfix/smtps # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_reject_unlisted_recipient=no # -o smtpd_client_restrictions=$mua_client_restrictions # -o smtpd_helo_restrictions=$mua_helo_restrictions # -o smtpd_sender_restrictions=$mua_sender_restrictions # -o smtpd_recipient_restrictions= # -o smtpd_relay_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - y - - qmqpd pickup unix n - y 60 1 pickup cleanup unix n - y - 0 cleanup qmgr unix n - n 300 1 qmgr #qmgr unix n - n 300 1 oqmgr tlsmgr unix - - y 1000? 1 tlsmgr rewrite unix - - y - - trivial-rewrite bounce unix - - y - 0 bounce defer unix - - y - 0 bounce trace unix - - y - 0 bounce verify unix - - y - 1 verify flush unix n - y 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - y - - smtp relay unix - - y - - smtp -o syslog_name=postfix/$service_name # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - y - - showq error unix - - y - - error retry unix - - y - - error discard unix - - y - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - y - - lmtp anvil unix - - y - 1 anvil scache unix - - y - 1 scache postlog unix-dgram n - n - 1 postlogd # # ==================================================================== # Interfaces to non-Postfix software. Be sure to examine the manual # pages of the non-Postfix software to find out what options it wants. # # Many of the following services use the Postfix pipe(8) delivery # agent. See the pipe(8) man page for information about ${recipient} # and other message envelope options. # ==================================================================== # # maildrop. See the Postfix MAILDROP_README file for details. # Also specify in main.cf: maildrop_destination_recipient_limit=1 # maildrop unix - n n - - pipe flags=DRXhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # ==================================================================== # # Recent Cyrus versions can use the existing "lmtp" master.cf entry. # # Specify in cyrus.conf: # lmtp cmd="lmtpd -a" listen="localhost:lmtp" proto=tcp4 # # Specify in main.cf one or more of the following: # mailbox_transport = lmtp:inet:localhost # virtual_transport = lmtp:inet:localhost # # ==================================================================== # # Cyrus 2.1.5 (Amos Gouaux) # Also specify in main.cf: cyrus_destination_recipient_limit=1 # #cyrus unix - n n - - pipe # flags=DRX user=cyrus argv=/cyrus/bin/deliver -e -r ${sender} -m ${extension} ${user} # # ==================================================================== # Old example of delivery via Cyrus. # #old-cyrus unix - n n - - pipe # flags=R user=cyrus argv=/cyrus/bin/deliver -e -m ${extension} ${user} # # ==================================================================== # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FRX user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user}